Tee Construction

1. Insert Line Free Ref Loc [0,0,0] Dxyz 0 0 0 Dy Fl_Th Xangle Draft Dx Flange_2 Xangle Draft_Negative Dx Flange_2 Dy -Flange_Th Dx -Flange
2. Join Pcurve Chn (select previous Line)
3. Insert Rectangle Height Web_Ht Width Web_Th Center Ref End (either line at the bottom left corner) Dxyz Flange_2 Web_Ht_2 0
4. Union Profile (select both curves)
5. Break Pcurve (select new profile)
6. Insert Fillet Radius Fillet (select both corners to be filleted)
7. Insert Fillet Radius Round (select both corners to be filleted)
8. Join Pcurve Chn (select curve)

Figure 4.14: Extrusion Profiles, Tee

Last Modified: Wed Aug 28 14:41:29 EDT 1996