Angle Construction

1. Insert Line Free Ref Loc [0,0,0] Dxyz 0 0 0 Dx Flange Dy Fl_Th Xangle Draft_Negative Dx -Flange End (select beginning of line)
2. Join Pcurve Chn (select previous Line)
3. Insert Rectangle Height Web_Ht Width Web_Th Vertex End (either line at the bottom left corner)
4. Union Profile (select all curves)
5. Break Pcurve (select new profile)
6. Insert Fillet Radius Fillet (select both corners to be filleted)
7. Insert Fillet Radius Round (select corner to be filleted)
8. Join Pcurve Chn (select curve)

Figure 4.16: Extrusion Profiles, Angle

Last Modified: Wed Aug 28 14:41:29 EDT 1996